Gocycle G1 - Page 22

Gocycle
®
Owner’s Manual Version August 2015
© Karbon Kinetics Limited. All Rights Reserved. 19
Figure 5-28
Adjust the fork quick-release
tension.
Figure 5-29
Adjust the fork quick-release
tension.
Figure 5-30
Notice that the fork is not
engaged with the fork lock
pin.
Fork lock pin is not seated
into fork.
Insert M6 allen key.
Insert M6
Allen key.
Insert M6 allen key.
Tighten internal nut until tension is
felt when quick-release is 90 degrees
from the closed position.
Open quick-release
to 90 degrees.