Gocycle
®
Owner’s Manual Version August 2015
© Karbon Kinetics Limited. All Rights Reserved. 65
9 MAINTENANCE AND ADJUSTMENTS
9.1
Maintenance and Service Centre Location
In the event that you require maintenance and service please refer to your nearest authorized Gocycle service
center. A list of approved service centers can be found at www.gocycle.com. Before attempting any maintenance on
your Gocycle you must visit www.gocycle.com/safety for up to date important safety related information.
9.2
Service interval
9.3
Water and Cleaning
We do not recommend that you ride your Gocycle in heavy rain or store it in damp or wet areas. Please read section
4.8 for safety recommendations under wet road conditions.
If you do find yourself riding while it is raining, we recommend that you use the motor. Using the motor will allow
heat to build up in the motor and the electronics, which will evaporate the water from these moisture-sensitive
components. Use caution when you use the motor on wet roads, as the roads will be slippery and the motor may
cause the front wheel to spin.
Water and moisture reduce the life of products such as bicycles through rust and/or corrosion. Leaving water and
moisture on the Gocycle could also result in premature failure of the electronics, battery or motor system.
Here are some best practice recommendations:
If your Gocycle has water on it, we recommend that you wipe it dry as soon as possible with a towel.
The less you expose Gocycle to moisture or water, the longer it will last.
If you wish to clean the Gocycle, we recommend that you use a damp towel or cloth and mild liquid
soap. First wipe down all areas with a damp towel, then wipe dry with a dry towel.
To clean the rim and tyre, remove the PitstopWheel, soak the rim and tyre in a bucket of soapy water
and then dry with a towel.
To Next Page
Loading...
