Goelst G-Motion - Overview Programming Menus

18
4
Programming
English
4.2 Overview Programming menus
LED mode LED colour
1 Menu 1 ON White
1.1 End positions ON Red
1.2 *) Set infrared Channels (IR) ON Green
1.3 *) RF ON Yellow
(reserved)
LED mode LED colour
2 Menu 2 blinks slowly White
2.1 Speed ON Red
2.2 DryC. IntermediatePos. ON Green
2.3 Light sensor
2.3.1
Sun sensor ON Yellow
2.3.2
Dawn/Dusk sensor ON Blue
2.3.3
Sensor mode ON Purple
2.4 CPS
2.4.1
Touch and Go ON Orange
2.4.2
Touch and Stop ON Light blue
LED mode LED colour
3 Menu 3 blinks fast White
3.1 Control mode ON Red
3.2 CW/CCW Inverted input ON Green
3.3 Timer ON Yellow
(reserved)
3.7 Factory settings ON Light blue
*)
If you have IR or RF control, see the IR or RF manual for further control and programming options.