SmartBox
®
1 / SmartBox
®
2 / SmartBox
®
3
part no. 28 100 57 f 9 / 20
PROGRAMMING
Overfilling of the tank due to incorrect entry values.
Operating media may leak.
These:
• are hazardous to water,
• are category 1,2 and 3 inflammable liquids,
• can ignite and cause burning,
• may cause falling injuries due to slipping.
Enter these values with care!
The entry values are also retained in the event of the failure of the supply voltage.
Press [ENTER] to return to display mode
Select probe measuring range see type label of the
probe - default setting 250 mbar
Density value kg/m³ (15 °C)
845 kg/m³ - default setting
Enter a special density value
with different measuring range
If the density of the stored medium is unknown, the reference height can be entered in menu
item “10.Trim height”