Chapter 3 Contents Main
3.4 Custom Targets - Add/Delete
●
This function allows you to add or edit custom targets in addition to the
ones that are already pre-programmed in the course data.
a) Adding Targets
From the Green View screen, move the toggle button to the right twice to get
to the “User Created Target” menu (User Created Tg). Push in the toggle
button once, and move the toggle button up/down to select a new target.
After choosing your target, push in the toggle button to select. (fig. 23)
b) Editing Targets
From the Green View screen, move the toggle button to the right once to
show your list of custom targets. Move the toggle button up/down to select
a target, and push in the toggle button once to choose and record.
c) Deleting Targets
From the Green View screen, move the toggle button to the right twice
to get to the User Created Target menu. Highlight the target you wish
to remove, and move the toggle button to the right once, and then push
Using Your GolfBuddy During a Round
- “G” along the top of the line indicates the green.
- “T” along the bottom of the line indicates the
teebox.
- The shaded gray area along the bottom
indicates your current position on the hole.
29
CDManualE 2009.7.17 4:32 PM 페이지29
To Next Page
Loading...
