43
5.2 Add/Edit Course
a. From the main menu screen, select “Advanced Menu”
b. In the advanced menu, scroll down to “New/Edit Course”
c. On the “Edit Course Name Screen” enter the course name using the
toggle button.
d. After entering the course name and select ok. Then the “Select Hole”
screen will appear. Using this setting, you can change the par
information for each hole using the toggle button. After entering the
par information for a hole, push in the toggle button to set.
e. After setting the par information, you will be taken to the “survey
screen” and the bottom area next to “T-Box” should be highlighted.
Walk to the tee box area and push in the toggle button (REC) to mark
your starting position.
f. After pressing REC, walk to the front of the green and press REC
again to record the distance to the front of the green.
g. Once you have recorded the distance to the front of the green, walk to
the center of the green and follow the same instructions to record the
yardage to the center, and also to the back.
h. After entering the yardage information for all 18 holes on the course,
press the “menu” button along the side of your device, and scroll
down to “save course” and push in the toggle button to save.
Creating Your Own Course Data
MainContentsChapter 5
CDManualE 2009.7.17 4:32 PM 페이지43
To Next Page
Loading...
