Golf Buddy PRO - Add;Edit;Delete Targets; Accessing Personally Mapped Course Information

44
5.3 Add/Edit/Delete Targets
To add or edit target points on new golf course data do the following:
a. Adding Targets- From the mapping screen, move the toggle button to
the right twice to get to the User Created Target menu (User Created
Tg). Push in the toggle button once, and move up/down on the toggle
button to select a new target. After choosing your target, push in the
toggle button to select.
b. Editing Targets- From the mapping screen, move the toggle button to
the right once, to show your list of targets. Move up/down on the
toggle button to select a target, and push in the toggle button once to
choose and record.
c. Deleting Targets- From the mapping screen, move the toggle button
to the right twice, to get to the User Created Target menu. Highlight
the target you wish to remove, and move the toggle button to the right,
and push in the toggle button to delete.
*Important*
You must save after each hole in order for the course data to come up in
the future.
5.4 Accessing Personally Mapped out Course Information
●
Courses which have been personally mapped do not auto recognize.
You must manually select the courses which you map out.
Main Contents Chapter 5
CDManualE 2009.7.17 4:32 PM 페이지44