Goodwe HT Series User Manual

38
08 System Commissioning
User Manual V1.1-2022-07-20
Short press
Short press
Short press
Long press for 2s
Long press for 2s
Long press for 2s
Long press for 2s
Long press for 2s
Long press for 2s
Long press for 2s
Long press
for 2s
Long press
for 2s
Shadow mode OFF
Power = XXXXX watts
Power limit OFF
Power = XXXXX watts
Power limit ON
Power = XXXXX watts
Set power limit
XXX%
Set Modbus address
Power = XXXXX watts
Shadow mode ON
Power = XXXXX watts
Setting up...
Setting up...
Setting is completed
successfully
Setting is completed
successfully
Setup failed
Setup failed
Set power limit
XXX%
Set power limit
XX%
Set power limit
XX%
Set address: XXX
Set address: XXX
Set address: XXX
Short press to select 0 ~ 1
Short press to select 0 ~ 2
Short press to select 0 ~ 1
Short press to select 0 ~9
Short press to select 0 ~ 9
Short press to select 0 ~ 9
Wait
Wait
Wait
Wait
Wait
Wait
Triangle
Star shape
Low voltage ride through ON
Power = XXXXX watts
Low voltage ride through OFF
Power = XXXXX watts
Grid type
Power = XXXXX watts
Long press 2s to enter
Initial password: 1111
Short press
Short press
Wait
Wait
Setting up...
Setting is completed
successfully
Setup failed
Long press for 2s
Arc discharge set
Long press 6s to enter
Old password****
Newpassword****
Wait
Setting up...
Setting is completed
successfully
Setup failed
Long press 2s to enter
Clearing of fault
self-checking
Enable
Disable
Wait
Wait
Wait
Wait
Setting up...
Setting is completed
successfully
Setup failed
Short press to select 0 ~ 9
Long press to move the cursor

Goodwe HT Series Specifications

General

Max DC Input Voltage	1100V
MPPT Voltage Range	200-1000V
Max AC Output Power	3.6kW to 10kW
Number of MPPTs	1 or 2
Max PV Input Voltage	1100V
MPPT Range	200-1000V
AC Output Frequency	50/60Hz
Communication	RS485, Ethernet
Operating Temperature Range	-25°C to 60°C
Protection Level	IP65