Gooxi SL201 User Manual

11
2.1.2 Indicator lights and buttons
Figure 2-4
No.
Indicator light/button
No.
Indicator light/button
1
Power switch
button/indicator
5
System Alarm Indicator
2
UID button/indicator
6
Network port 1 connection
status indicator
3
Reset server button
7
Network port 2 connection
status indicator
4
Hard drive indicator
-
-
LED status description
Logo
Indicator
light/button
Status description
Power Indicator
Description of the power indicator light:
Green (steady on): Indicates that the device has been
powered on normally.
Green (blinking): Indicates that the device is in
standby.
Green off: Indicates that the device is not powered on.
Power button description:
Press the button shortly in the power-on state, and the
OS will shut down normally.
Press and hold the button for 6 seconds in the
power-on state to force the server to power off.
Press the button shortly in the power-on state to start
the machine.
UID
button/indicator
The UID button/indicator is used to conveniently
locate the server to be operated, and the indicator can
be turned off or on by manually pressing the UID
button or remotely controlling the BMC command.
Description of UID indicator light:
Blue (steady on/blinking): Indicates that the server is
located.
Off: Indicates that the server is not located.
UID button description: Short press this button to turn
on/off the positioning light.
Reset server
button
Press to restart the server

Gooxi SL201 Specifications

General

Brand	Gooxi
Model	SL201
Category	Server
Language	English