Gooxi SR201 2U User Manual

34
4
Configuration Instructions
4.1 Initial configuration
4.1. 1 Power on
 Before powering on, it is necessary to ensure that all configurations
of the server are installed in accordance with the corresponding
specifications and standards, and keep the server turned off but not
unplugged from the power supply. And all cables are connected
properly, and the power supply voltage is consistent with that of the
device.
 During the power-on process, please do not plug in hard disks, power
modules, network cables or other external devices and cables.
 If the server has just been unplugged from the power supply, please
wait for 1 minute before turning on the power.
 Server power-on power status:
The power supply is powered on, but the server is not turned on, and
the power LED is yellow.
Power on, the server starts up, and the power LED is green.
 How to power on the server:
The server's system defaults to "power-on strategy", that is, the
server will automatically start after power-on. Users can modify it on
the BIOS Setup interface.
 Press the <DEL> or <ESC> key on the keyboard during the boot
process to enter the BIOS Setup interface, and find the following
interface:

Gooxi SR201 2U Specifications

General

Brand	Gooxi
Model	SR201 2U
Category	Server
Language	English