Grace EASY - Brake Pad Removal and Insertion; Brake Pad Removal, Insertion, and Retaining Screw Warning

GRACE EASY Manual
Page | 113
Remove the brake pads upwards and out of the brake
calliper.
Insert the brake pads into the brake calliper one by
one. The brake pads must point inwards towards the
brake disc. They are held into position by magnets.
The retaining screw on the brake pad is always fitted with a one-time action thread
locking mechanism. If you use the screw more than once it may come undone while
riding. This can cause the brakes to fail. Risk of accident!
Always replace the retaining screws with new ones immediately after they have
come undone. Dispose of the used retaining screws immediately.