Grace EASY - 5.11. Replacing the Brake Pads; Brake Pad Replacement Steps and Piston Caution

Page | 112
GRACE EASY Manual
5.11. Replacing the brake pads
Never push the pistons back while the pads are disassembled as otherwise you may
damage them.
This description applies for replacing brake pads on the front and rear wheels.
Remove the wheel as shown in the instructions.
Move back the pistons in the brake calliper while the
brake pads are installed with the transport safety or
using a wide screwdriver. Do not apply heavy force.
Apply from different sides where necessary until the
slave pistons slide back fully without needing to apply
heavy force.
Twist the retaining screw on the brake pad out using
the Torx T25 spanner.