Graco D200 - Platen Mounting Kit 222776; Platen Mounting Kit 247335; Platen Mounting Kit 247336; Platen Mounting Kit 247337

Accessories
3A0233B 25
Platen Mounting Kit 222776
See page 11 for mounting instructions. Required for
mounting Check-Mate 450, 800, 1000, and 2100 pumps
on the ram.
See manual 405952 for parts.
Platen Mounting Kit 247335
See pages 12 for mounting instructions. Required for
mounting Fire-Ball 300 and Fire-Ball 425 pumps.
C
Platen Mounting Kit 247336
See pages 12 for mounting instructions. Required for
mounting Fire-Ball 300, 50:1 pumps.
‡ Mounting hardware for pump to plate (CA).
Platen Mounting Kit 247337
See pages 12 for mounting instructions. Required for
mounting Fire-Ball 425, 10:1, 50:1, and 75:1 pumps.
‡ Mounting hardware for pump to plate (CA).
Ref.
No. Part No. Description Qty.
CC 100133 LOCKWASHER, spring, 3/8 in. 4
CD 100004 SCREW, hex hd, cap;
3/8-16 x 1-1/4 in. (31 mm)
4
CF 160098 SEAL, ram plate 1
CG 162789 PLATE, seal, standard 2
CH 162788 GASKET; cork 1
Ref.
No. Part No. Description Qty.
CA 184140 PLATE, mounting 1
CB 100101 SCREW, hex hd, cap;
3/8-16 x 1 in. (25.4 mm)
4
CC 100133 LOCKWASHER, spring, 3/8 in. 8
‡ 100022 SCREW, hex hd, cap;
1/4-20 x 3/4 in.
2
‡ 100016 WASHER, lock 2
‡ 100015 NUT, hex, 1/4-20 2
Ref.
No. Part No. Description Qty.
CA 162225 PLATE, mounting 1
CB 100101 SCREW, hex hd, cap;
3/8-16 x 1 in. (25.4 mm)
4
CC 100133 LOCKWASHER, spring, 3/8 in. 8
‡ 100022 SCREW, hex hd, cap;
1/4-20 x 3/4 in.
2
‡ 100016 WASHER, lock 2