EasyManuals Logo

Graco InvisiPac HM25c User Manual

Graco InvisiPac HM25c
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
334784G
EN
Operation, Repair and Parts
InvisiPac
®
Pattern Controller
To control fluid dispense valves of adhesive supply equipment. For professional use only.
Not approved for use in explosive atmospheres or hazardous locations.
See page 3 for model information and Agency approvals.
Important Safety Instructions
Read all warnings and instructions in this manual
and related manuals. Save these instructions.
WLD

Table of Contents

Questions and Answers:

Graco InvisiPac HM25c Specifications

General IconGeneral
ModelHM25c
BrandGraco
SeriesInvisiPac
TypeController
Power Supply200-240 VAC, 50/60 Hz
Temperature ControlPID Control
Heating Capacity2.5 kW
Electrical Requirements200-240 VAC, 50/60 Hz
Voltage200-240 VAC
Current12A
Power Consumption2.5 kW (max)
Humidity0-95% non-condensing
Enclosure RatingIP20

Related product manuals