Screens
334784G 35
Advanced Screens
Advanced - Display
General display settings including language, time, and
password protection.
Advanced - Units
Select the system units to be used on the display.
Name Description
Language Select the display language
Date format Select the display format
Date Enter display date
Time Enter display time
Password Enter password to restrict access to
Setup screens. NOTE: A value of
“0000” does not require a password for
access to setup screens.
Screen
saver
Enter time-out for the display screen
saver. NOTE: A value of “0” disables
screen saver.
Silent mode If selected, disables the display been
functionality
Lock run
screens
If selected, operators will not be able to
change most run screen settings
NOTE: In order for this setting to have
any effect, a password other than
“0000” must be entered above.
NOTE: When referring to the run set of
screens from the setup screens, the
operator will have two minutes to make
changes before the screens lock.
Name Description
Temperature Select the system temperature units
(integrated systems only)
Mass units Select the system mass units (inte-
grated systems only)
Distance units Select the system distance units.
NOTE: This setting applies to all pat-
tern control distance values except
when time based mode is selected on
PC Setup - Line Mode (distance units
become time units of milliseconds).
To Next Page
Loading...
Need help?
General
