Graco Reactor A-XP1 User Manual

DataTrak Diagnostic Codes
10 3A1570V
DataTrak Diagnostic Codes
DataTrak can diagnose several problems with the pump. When the monitor detects a problem, the LED will flash and
a diagnostic code will appear on the display.
To acknowledge the diagnosis and return to the normal operating screen, press once to wake up the display,
and once more to clear the diagnostic code screen.
Symbol Code Code Name Diagnosis Cause
E-2 Diving Down Leak during downstroke. Worn intake valve.
E-3 Low Battery Battery voltage too low to
stop runaway.
Low battery. Replace
battery; see page 41.
E-6 Blown Fuse Fuse is blown. Replace fuse;
see page 41.
• Faulty solenoid or
solenoid wiring.
• Extreme temperatures
(above 140°F [60°C]).

Graco Reactor A-XP1 Specifications

General

Brand	Graco
Model	Reactor A-XP1
Category	Paint Sprayer
Language	English