Graco Reactor E-20 Series Operation Manual

Accessories
312065V 37
Accessories
Feed Pump Kits
Pumps, hoses, and mounting hardware to supply fluids
to Reactor. Includes 246483 Air Supply Kit. See
309815.
246483 Air Supply Kit
Hoses and fittings to supply air to feed pumps, agitator,
and gun air hose. Included in feed pump kits. See
309827.
246978 Circulation Kit
Return hoses and fittings to make circulation system.
Includes two 246477 Return Tube Kits. See 309852.
246477 Return Tube Kit
Desiccant dryer, return tube, and fittings for one drum.
Two included in 246978 Circulation Kit. See 309852.
248669 Conversion Kit
Convert any E-XP2 to a E-30 with 15.3kW of heat.
Include new pumps, bearing, and fitting to accomplish
conversion. See manual 309574.
Heated Hoses
50 ft (15.2 m) and 25 ft (7.6 m) lengths, 1/4 in. (6 mm),
3/8 in. (10 mm), or 1/2 in. (13 mm) diameter, 2000 psi
(14 MPa, 140 bar) or 3500 psi (24 MPa, 241 bar). See
309572.
Heated Whip Hoses
10 ft (3 m) whip hose, 1/4 in. (6 mm) or 3/8 in. (10 mm)
diameter, 2000 psi (14 MPa, 140 bar) or 3500 psi (24
MPa, 241 bar). See 309572.
Fusion Spray Gun
Air purge gun, available in round or flat pattern. See
309550.
246085 Data Reporting Kit
Records actual temperature, temperature setpoint,
actual pressure, cycles, and diagnostic code data from
Reactor. Downloads data to PC with Microsoft
®
Windows 98 or later. See 309867.
248848 Data Reporting Kit
Records actual temperature, temperature setpoint,
actual pressure, cycles, and diagnostic code data from
Reactor. Downloads data to PC with Microsoft
®
Windows 98 or later. Does not include interface module.
See 309867.

Graco Reactor E-20 Series Specifications

General

Brand	Graco
Model	Reactor E-20 Series
Category	Paint Sprayer
Language	English