Operation
38
the display next to the T. In other words, entering “9“ is equivalent to a slice thickness
of 0.9 mm
pause Designates the idle time
between two portions. This
allows the operator to remove
the product from the tray
without having to repeatedly
restart the machine.
Entry is at intervals of 0.5 seconds.
Maximum idle time: 120 s
Special circular fanning features
Diameter of the circle through the
central points of the slices (partial
diameter)
Note:
The outer diameter of the “DA” circular
fan is the result of the cutting material
calibre DK + DM
Example:
Salami DK = Ø 60
Set semi-circle Dm = 100
DK 60
DM + 100
Dia circle
(DM)
DA = 160
X start
(X0)
Smallest distance of the y axis to the
slice circle = start position in X
Y start
(Y0)
Smallest distance of the x axis
to the slice circle = start position in Y
DM
Y start
X start
Y
X
DA
To Next Page
Loading...
