Grandstream Networks DP760 User Manual

P a g e | 24
DP760 User Manual
Version 1.0.3.34
Use Manually
Configured RFPI
Allows to use manually configured RFPI (if non-empty) when set to Yes.
If set to NO, the DP760 will search for a DP750 to connect with, regardless of
manual configuration.
Network Settings
Table 7: Network Settings Pages Definitions
Network Settings – Basic Settings
IP Address Mode
Selects IP address mode (DHCP, Static IP or PPPoE) for DP760 DECT Repeater.
Preferred DNS
Server
Specifies preferred DNS server to use when DHCP, PPPoE or Static mode is set.
DHCP Settings
Host name
(Option 12)
Specifies the name of the client. The name may or may not be
qualified with the local domain name. This field is optional but may
be required by ISP.
Vendor Class
ID (Option 60)
Exchanges vendor class ID by clients and servers to convey
particular configuration or other identification information about a
client. Default is DP7XX.
PPPoE Settings
Configures PPPoE account ID, password and service name.
Static IP Settings
Sets IP address, subnet mask, gateway, DNS server 1, and DNS server 2.
Network Settings – Advanced Settings
802.1X Mode
Enables 802.1X mode. To enable this mode, you should select EAP-MD5. Default
is Disable.
802.1X Identity
Configures the identity for 802.1X mode.
MD5 Password
Determines the MD5 password for 802.1X mode.
802.1X CA
Certificate
Uploads / deletes the 802.1X CA certificates.
802.1X Client
Certificate
Uploads / Deletes the 802.1X Client Certificates.
Enable LLDP
Activates LLDP (Link Layer Discovery Protocol). Default is Yes.
Layer 2 QoS
Enable VLAN
Enables / Disables the VLAN mode. Default is Disabled.
https://arttel.ru/
https://arttel.ru/shop/dect-ip-telefony/grandstream-dp760

Grandstream Networks DP760 Specifications

General

Brand	Grandstream Networks
Model	DP760
Category	Repeater
Language	English