UPGRADING AND PROVISIONING
The DP760 DECT Repeater can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address
for the TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or
HTTP/HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
fw.ipvideotalk.com/gs
Firmware Upgrade Procedure
Please follow below steps in order to upgrade the firmware version of your DP760 repeater station:
1. Access the Web GUI of your DP760 using the admin’s username and password. (Default username
and password is: admin/admin).
2. Navigate to Maintenance Firmware Upgrade page, enter the IP address or the FQDN for the
upgrade server in Firmware Server Path field and choose to upgrade via TFTP or HTTP/HTTPS.
3. Make sure to select Always Check for New Firmware.
4. Update the change by clicking the Save and Apply button. Then reboot or power cycle the device
to update the new firmware.
To Next Page
Loading...
Need help?
General