Use DP750 Repeater Management to Associate DP760
The repeater management mode on the DP750 allows to associate, dissociate and manage discovered
and paired repeater stations from DP750 web GUI.
❖ Enabling Repeater Management Mode
The following steps illustrate how to enable and use the Repeater Management mode on DP750:
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password are admin/admin).
2. Navigate to DECT General Settings and set Enable Repeater Management to Yes.
3. Press Save and Apply, then reboot the unit to apply the new settings.
Figure 13: Repeater Associated Status
❖ Associating DP760 using Repeater Management Mode on DP750
The repeater management mode displays discovered and paired devices using their name, IP and Mac
addresses and also gives the possibility of associating the DP750 Base Station with DP760 DECT Repeater.
Please refer to following steps in order to associate DP760 with DP750 using repeater management mode.
To Next Page
Loading...
Need help?
General