Grandstream Networks DP760 User Manual

P a g e | 25
DP760 User Manual
Version 1.0.3.34
Settings
Layer 2 QoS
802.1Q/VLAN
Tag
Sets layer 2 QoS 802.1Q/VLAN tag. Default is 0.
Layer 2 QoS
802.1p Priority
Value for SIP
signaling
Sets layer 2 QoS 802.1p priority value for SIP signaling.
Default is 0.
Layer 2 QoS
802.1p Priority
Value for RTP
media
Sets layer 2 QoS 802.1p priority value for RTP media.
Default is 0.
UPnP Discovery
Settings
Enable UPnP
discovery
Enables UPnP discovery feature. Default is Yes.
UPnP
discovery
notify interval
Specifies in seconds the interval to send out SSDP notifies.
Default is 30.
Maintenance Page Definitions
Table 8: Maintenance Pages Definitions
Firmware Upgrade
Firmware Upgrade
Selects how firmware upgrade request will be sent: Always Check for New
Firmware, Check New Firmware only when F/W pre/suffix changes, or
Always Skip the Firmware Check.
HTTP/HTTPS User
Name
Configures the user name to authenticate with HTTP/HTTPS server.
HTTP/HTTPS
Password
Configures the password to authenticate with HTTP/HTTPS server.
Always send HTTP
Basic
Authentication
Information
Includes configured user name and password in HTTP request before receiving
authentication challenge from the server. Default is No.
Verify host when
using HTTPS
Verifies host name in server certificate when using HTTPS. Default is Yes.
Upgrade via
Selects firmware upgrade method: TFTP, HTTP or HTTPS.
https://arttel.ru/
https://arttel.ru/shop/dect-ip-telefony/grandstream-dp760

Grandstream Networks DP760 Specifications

General

Brand	Grandstream Networks
Model	DP760
Category	Repeater
Language	English