DP760 DECT REPEATER DISSOCIATION
To disconnect DP760 DECT Repeater from the Base Station DP750, please refer to following options:
Using DP760 Web GUI
To disconnect your DP760 DECT Repeater via Web GUI, please refer to following steps:
1. Access the Web GUI of your DP760 using the admin’s username and password. (Default username
and password are: admin/admin).
2. Navigate to Status DECT Status Global Functions and press Disconnect.
3. The DP760 DECT Repeater will be automatically disconnected from the DP750 and it will start again
scanning for available RFPs.
Figure 15: DECT Repeater Status on DP750
Using Page Button
Long press on page button on the back panel of DP760 for 7 seconds, it will remove the association values
of the previous base station.
To Next Page
Loading...
Need help?
General