DP760 User Manual
Version 1.0.3.34
Sets IP address or domain name of firmware server. The URL of the server that
hosts the firmware release.
Default is fm.grandstream.com/gs.
Checks if firmware file is with matching prefix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
firmware server.
Checks if firmware file is with matching postfix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
firmware server.
Allow DHCP
Option 43 and
Option 66 to
Override Server
Obtains configuration and upgrade server information from DHCP server using
options 66 and 43.
Note: If DHCP Option 66 is enabled, the repeater station will attempt downloading
the firmware file from the server URL provided by DHCP, even though Firmware
Server Path is left blank.
Specifies when the firmware upgrade process will be initiated; there are 4 options:
(Default is No)
• No: DP760 DECT Repeater will only do upgrade once at boot up.
• Check every X minutes: User needs to specify a period in minutes.
• Check every day: User needs to specify Hour of the day (0-23).
• Check every week: User needs to specify Hour of the day (0-23) and
Day of the week (0-6). Note: Day of week is starting from Sunday.
Decrypts the firmware file using specified key (32-digit in Hexadecimal) when
encrypted.
Decrypts XML configuration file when encrypted. The password used for encrypting
the XML configuration file is using OpenSSL.
Enters user name to authenticate with HTTP/HTTPS server.
Enters password to authenticate with HTTP/HTTPS server.
Always send HTTP
Basic
Authentication
Information
Includes configured user name and password in HTTP request before receiving
authentication challenge from the server. Default is No.
https://arttel.ru/
https://arttel.ru/shop/dect-ip-telefony/grandstream-dp760
To Next Page
Loading...
Need help?
General