Instructions for local firmware upgrade via TFTP:
1. Unzip the firmware files and put all of them in the root directory of the TFTP server.
2. Connect the TFTP server and the DP760 DECT Repeater to the same LAN segment.
3. Launch the TFTP server and go to the File menu Configure Security to change the default setting
of TFTP server from Receive Only to Transmit Only for the firmware upgrade.
4. Start the TFTP server and configure the TFTP server on the DP760 DECT Repeater Web GUI.
5. Configure the Firmware Server Path to the IP address of the TFTP server.
6. Save and Apply the changes and reboot the DP760 DECT Repeater.
End users can also choose to download a free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS Web server.
To Next Page
Loading...
Need help?
General