Figure 43: Disabled Call Forward
When the feature is enabled, the phone’s LCD screen will show the following figure.
Figure 44: Enable Call Forward
When forwarding a call, the recipient will display a “diverted from” message.
Figure 45: Diversion Information
A Call Forward using BLF can also be performed by pressing the BLF key set on VPK/MPK as a forward destination. You only need to
Subscribe to a valid BLF and press Forward Key then the BLF key to perform the call forward.
Voice Mail
A blinking red MWI (Message Waiting Indicator) on the top right corner of the phone indicates a message is waiting. Check the voicemail
box to retrieve the message by entering the voice mail number of the server; Or by pressing the Voicemail button; or from the Phone’s
Menu > Messages > Voice Mails
Notes
Voice Mail User ID and the voice mail number must be properly configured:
under Web GUI🡪Account X🡪General Settings.
An IVR will prompt the user through the process of message retrieval.
To Next Page
Loading...
