Grandstream Networks GXP1160 User Manual

FIRMWARE VERSION 1.0.7.4 GXP1160/GXP1165 USER MANUAL Page 52 of 67
Config Server Path
Defines the server path for provisioning. It could be different from the firmware
server for upgrading.
Firmware File Prefix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
Firmware File Postfix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
Config File Prefix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching prefix will be downloaded.
Config File Postfix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching postfix will be downloaded.
Hoteling Event and
Option 66 Override
Server
Default setting is “Yes”. DHCP option 66 originally was only designed for TFTP
server. Later on it was extended to support an HTTP URL. GXP phones
support both TFTP and HTTP server via option 66. Users can also use DHCP
option 43 vendor specific option to do this. DHCP option 43 approach has
priorities.
Allow DHCP Option 120
to override SIP Server
Enables DHCP Option 120 from local server to override the SIP Server on the
phone. The default setting is "No".
3CX Auto Provision
Phone will multicast SUBSCRIBE for provision if this feature is enabled.
Automatic Upgrade
Enables automatic upgrade and provisioning. The default setting is "No".
Hour of the Day (0-23)
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Day of the Week (0-6)
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Authenticate Conf File
Authenticates configuration file before acceptance. The default setting is "No".
Maintenance -> Syslog
Syslog Server
The URL or IP address of the syslog server for the phone to send syslog to.
Syslog Level
Selects the level of logging for syslog. The default setting is "None". There are
4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:
 product model/version on boot up (INFO level);
 NAT related info (INFO level);
 sent or received SIP message (DEBUG level);
 SIP message summary (INFO level);

Grandstream Networks GXP1160 Specifications

General

Brand	Grandstream Networks
Model	GXP1160
Category	IP Phone
Language	English