FIRMWARE VERSION 1.0.7.4 GXP1160/GXP1165 USER MANUAL Page 53 of 67
inbound and outbound calls (INFO level);
registration status change (INFO level);
negotiated codec (INFO level);
ethernet link up (INFO level);
SLIC chip exception (WARNING and ERROR levels);
memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages or not.
The default setting is "No".
Auto Recover From
Abnormal
Configures whether auto recover or not when the phone is running abnormal.
The default setting is "Yes".
Selects display language on the phone.
Specifies the language file postfix for downloaded language.
Enables TR-069. The default setting is "No".
URL for TR-069 Auto Configuration Servers (ACS).
Enables periodic inform. If set to "Yes", device will send inform packets to the
ACS. The default setting is "No".
Sets up the periodic inform interval to send the inform packets to the ACS.
Connection Request
Username
The user name for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
The port for the ACS to connect to the phone.
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
Configuration via Keypad
Menu
Configures the access control for the users to configure from keypad Menu.
There are three different modes:
Unrestricted. All the options can be accessed in keypad Menu. This mode
is for administrator using.
Basic settings only. The "Config" option will not be available in LCD
Menu.
Constraint Mode. "Config", "Factory Functions" and "Network" options