P a g e | 75
GXP21XX User Guide
Version 1.0.9.108
VPK Paging Support inside Call Screen
Users can use their VPK mode preconfigured with while in call screen. Such as Speed Dial, BLF, dial
DTMF…, as shown in the figure below.
Figure 52: VPK Paging
Active VPK Page
If active VPK page is enabled, when monitored BLF number is called, the screen will generate the VPK
Page that shows which VPK key(s) is(are) active as below, where you can see the page number is a
handset icon, which indicate that this page is an active VPK page. The original VPK pages are still navigable
by pressing Next softkey
This option can be found under device web UI Settings Call Features Enable Active VPK Page.
Figure 53 : Active VPK Page
Outbound Notification
The GXP2130/GXP2140/GXP2160/GXP2135/GXP2170 allows users to align the outbound notification with
the call log change if the same account is registered in multiple phones.