Use # as Redial Key
Allows users to configure the "#" key as the "Redial" key. If set to "Yes", the "#" key will
immediately redial the last call. In this case, this key is essentially equivalent to the "Redial" key.
If set to "No", the "#" key is treated as part of the dialed string. Default is “Yes”.
DND Call Feature On
Configures the feature code to enable the DND (Do Not Disturb) feature for this account. If it is
configured, the phone will dial the feature code automatically when the DND feature is enabled.
DND Call Feature Off
Configures the feature code to disable the DND (Do Not Disturb) feature for this account. If it is
configured, the phone will dial the feature code automatically when the DND feature is disabled.
No Key Entry Timeout (s)
Determines the expiration timer (in seconds) for no key entry. The dialed digit will be sent out if
no other digits entered within the set period. The default value is 4 seconds. The valid range is 1
- 15. This feature does not work if the dialer page is entered via the Account Widget on the
phone.
Ring Timeout (s)
Defines the expiration timer (in seconds) for the rings with no answer.
The default setting is 60. The valid range is from 10 to 300.
Refer-To Use Target
Contact
Sets the phone system to use the target’s Contact header tag to the Refer-To header in the SIP
REFER message during an attended transfer.
The default setting is “No”.
RFC2543 Hold If yes, c=0.0.0.0 will be used in INVITE SDP for hold.
Call Forwarding
Call Forward Type
Sets the Call Forwarding feature for this account.
● None: Disable call forwarding feature.
● Unconditional: Set to forward all calls to a specified account.
● Time based: Set the call forwarding rule based on time. The system can forward incoming
calls to the accounts of In Time Forward to and Out Time Forward to.
● Others: Set the call forwarding rule based on following account status.
1. Forward when Busy: the call will be forward to number set under “Busy To” when the account
is busy.
2. Forward when No Answer: The call will be forwarded to the number set under “No Answer To”
after the configured timeout. (range 1- 120s)
3. Forward when DND: When the phone is on DND mode the call will be forwarded to number
configured under “DND To”.
Dial Plan
Dial Plan Prefix Configures the digits prepended to the dialed number.
Disable Dial Plan
Enables/disables the Dial plan mechanism for different cases. If the specific case is checked,
the Dial plan mechanism will be disabled.
● Dial Page: It controls the pattern of dialing numbers from the keypad, phone app and account
widget.
● Contact: It controls the pattern of dialing numbers from local or LDAP.
● Incoming Call History: It controls the pattern of dialing numbers from inbound call logs.
● Outgoing Call History: It controls the pattern of dialing numbers from outbound call logs.
● Programmable Key & Click2Dial: It controls the pattern of dialing numbers from MPK app and
the link on the webpage.
The default setting is unchecking all the cases.
Dial Plan Configures the dial plan to establish the expected number and pattern of digits for a telephone
number. This parameter configures the allowed dial-plan for the phone.
Dial Plan Rules:
To Next Page
Loading...
Need help?
General
