Syslog Level
Selects the level of logging for syslog. The default setting is “None”. There are 4 levels from the
dropdown list: DEBUG, INFO, WARNING and ERROR. The following information will be included in the
syslog packet:
DEBUG (Sent or received SIP messages).
INFO (Product model/version on boot up, NAT related info, SIP message summary, Inbound and
outbound calls, Registration status change, negotiated codec, Ethernet link up).
WARNING (SLIC chip exception).
ERROR (SLIC chip exception, Memory exception).
Note: Changing syslog level does not require a reboot to take effect.
Syslog Keyword
Filter
Only send the syslog with keyword, multiple keywords are separated by comma. Example: set the filter
keyword to “SIP” to filter SIP log.
Logcat
Clear Log Clears the log files saved in the phone system.
Log Tag Configures the filter to display the specified process log file.
Log Priority
Selects the log priority to display. It can be selected from list below:
Verbose (Default Setting)
Debug
Info
Warning
Error
Fatal
Silent (suppress all output)
Get Log Displays the log file on the web page.
Debug
One-click
Debugging
One-click
Debugging
Capture the checked info in the debugging list, click “Start” to debug if including “Capture trace” item
and click “Stop” to end, Click “Capture” in another situation. All retrieved files will be generated to a
package, and the last package will be overwritten, while the trace file will stay remain.
Debug Info
Menu
Display a list of info items that can be debugged, currently supports system logs, info log, capture
package, tombstones and ANR log. The captured data can be viewed in “Debug information list”.
The default is all selected.
Debug Info List
You can select the existing debugging info package or grab package. Click the “Delete” button on the
right to delete the file.
View Debug Info
You can select the existing debugging info package or grab package. Click the “Delete” button on the
right to delete the file.
Core Dump
Enable Core
Dump
Generation
Configures whether to generate and save the core dump file when the program crashes.
The default setting is “No”.
Core Dump List
Selects the existing core dump file in the drop-down box. Users could delete the file by pressing on
“Delete” button.
View Core Dump
Press “List” button to view all existing core dump files. The files are listed in chronological order, users
could click the file name to download the file to the local computer.
Record
Record
Click to start capturing audio data, click the “Stop” button to end. To capture the audio data of the
device can help to locate audio issues.
The default is not enabled. You can record up to 1-minute audio data.
Recording List Choose the existing audio file. Click the “Delete” button on the right to delete this file.
To Next Page
Loading...
