Always send HTTP Basic
Authentication
Information
Default is Send HTTP Basic Authentication Information only when
challenged. If set to Always, device will send configured user name and
password within HTTP request without server sending authentication
challenge.
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching prefix will be downloaded.
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching postfix will be downloaded.
Allow DHCP Option 66
or 160 to override server
If set to “Yes”, configuration and upgrade server information can be obtained
using DHCP option 66 or option 160 from DHCP server located in customer’s
environment.
Note: If DHCP Option 66 is enabled, the gateway will attempt downloading a
configuration file from the server URL provided by DHCP, even though Config
Server Path is left blank.
To Next Page
Loading...
Need help?
General
