HT801/HT802 Administration Guide
Version 1.0.13.7
HT801/HT802 Technical Specifications
Following tables resumes all the technical specifications including the protocols/standards supported,
voice codecs, telephony features, languages and upgrade/provisioning settings for the HT801 and the
HT802.
Table 2: HT801/HT802 Technical Specifications
One (1) 10/100Mbps auto-sensing Ethernet port (RJ45).
POWER, INTERNET, PHONE1,
PHONE2.
Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference.
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726,
G.722, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation.
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for
Fax Pass-through.
Short/Long Haul
Ring Load
5 REN: Up to 1km on 24 AWG.
2 REN: Up to 1km on 24 AWG.
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID.
Busy Tone, Polarity Reversal/Wink, Loop Current.
TCP/IP/UDP, RTP/RTCP, FTP/FTPS, HTTP/HTTPS, ARP/RARP, ICMP, DNS,
DDNS, DHCP, NTP, TFTP, SSH, Telnet, STUN, SIP (RFC3261), SIP over
TCP/TLS, SRTP, TR-069.
Layer 3 (ToS, DiffServ, MPLS).
In-audio, RFC2833 and/or SIP INFO.
HTTP, HTTPS, FTP, FTPS, SSH, Telnet, TFTP, TR-069, secure and automated
provisioning using AES encryption, syslog.