EasyManuals Logo
Home>Grandstream Networks>Telephone Accessories>HT801

Grandstream Networks HT801 Administration Guide

Grandstream Networks HT801
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
P a g e | 10
HT801/HT802 Administration Guide
Version 1.0.13.7
Firmware Version 1.0.3.7
Added option “Use Actual Ephemeral Port in Contact with TCP/TLS” to force device to use actual
ephemeral port. [Use Actual Ephemeral Port in Contact with TCP/TLS]
Added option “SIP URI Scheme When Using TLS” to choose between ‘SIP’ and ‘SIPS’. [SIP URI
Scheme When Using TLS]
Added Option “Backup Outbound Proxy” to use backup Outbound Proxy if Outbound Proxy registration
expires. [Backup Outbound Proxy]
Added option “Prefer Primary Outbound Proxy” to enable registration through primary outbound proxy
if registration expires. [Prefer Primary Outbound Proxy]
Added option “Enable RTCP” to enable RTCP function through Web UI. [Enable RTCP]
Added option Hold Target Before Refer” to enable device to hold before being referred. [Hold Target
Before Refer]
Added Option “Enable Session Timer” to disable session timer. [Enable Session Timer]
Added feature “Conference URI” to support Conference URI. [Conference URI]
Added feature “White List for WAN Side” for remote management. [White List for WAN Side]
Added feature “Black List for WAN Side” for remote management. [Black List for WAN Side]
Added option “Web Access Mode” to choose between “HTTPS” and “HTTP” to access device Web UI.
Added feature “HTTPS Web Port” to set HTTPS web port instead of using default HTTPS port. [HTTPS
Web Port]
Added feature “SSH Port” to self-configure SSH port. [SSH Port]
Added SNMP related features.
Firmware Version 1.0.3.2
This is the initial version for HT801.
Added option “DNS SRV use Registered IP” [DNS SRV use Registered IP].
Changed default NTP server from us.pool.ntp.org to pool.ntp.org.
Firmware Version 1.0.2.5
Changed OPUS Payload Type default value to 123 to match other GS products. [OPUS Payload Type].
Firmware Version 1.0.2.3
Added a re-enter box to confirm change user and admin password on web GUI to avoid typo or mistakes
[Confirm Admin Password][Confirm End User Password].
Add new iLBC libraries to improve iLBC audio quality.
Firmware Version 1.0.1.9
This is the initial version.

Table of Contents

Other manuals for Grandstream Networks HT801

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks HT801 and is the answer not in the manual?

Grandstream Networks HT801 Specifications

General IconGeneral
BrandGrandstream Networks
ModelHT801
CategoryTelephone Accessories
LanguageEnglish

Related product manuals