Grandstream Networks HT801 Administration Guide

P a g e | 25
HT801/HT802 Administration Guide
Version 1.0.13.7
Figure 10: Web HTTP Port
Web Configuration Pages Definitions
This section describes the options in the HT801/HT802 Web UI. As mentioned, you can log in as an
administrator or an end user.
• Status: Displays the system info, network status, account status, and line options.
• Basic Settings: Configures the end user level password, IP address modes, web access, time zone
settings and language.
• Advanced Settings: Configures networks, upgrading and provisioning, TR-069, security settings,
date and time, syslog, audio settings, call settings and call progress tones.
• FXS Port (1,2): Configures SIP settings, SIP registration, accounts settings, NAT settings, call features,
ring tones.
Status Page Definitions
Table 6: Status Page Definitions
Account Status
MAC Address
Shows device ID in hexadecimal format. This is needed by network
administrators for troubleshooting. The MAC address will be used for
provisioning and can be found on the label on original box and on the label
located on the bottom panel of the device.
IPv4 Address
Displays assigned IPv4 address.
IPv6 Address
Displays assigned IPv6 address.

Grandstream Networks HT801 Specifications

General

Brand	Grandstream Networks
Model	HT801
Category	Telephone Accessories
Language	English