UPGRADING AND PROVISIONING
The HT801/HT802 can be upgraded via TFTP/HTTP/HTTPS/FTP/FTPS by configuring the URL/IP Address
for the TFTP/HTTP/HTTPS/FTP/FTPS server and selecting a download method. Configure a valid URL for
TFTP or FTP/FTPS or HTTP/HTTPS (default is HTTPS); the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
fw.ipvideotalk.com/gs
Firmware Upgrade procedure
Please follow below steps to upgrade the firmware version of your HT801/HT802:
1. Access your HT801/HT802 UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings→Firmware Upgrade and Provisioning page and enter the IP address
or the FQDN for the upgrade server in "Firmware Server Path" field and choose to upgrade via
TFTP, FTP/FTPS or HTTP/HTTPS.
5. Make sure to check “Always Check for New Firmware”.
6. Update the change by clicking the " Apply" button at the bottom of the page. Then "Reboot" or
power cycle the HT802 to update the new firmware.
To Next Page
Loading...
Need help?
General
