Grandstream Networks HT801 Administration Guide

P a g e | 27
HT801/HT802 Administration Guide
Version 1.0.13.7
Basic Settings Page Definitions
Table 7: Basic Settings Page
Basic Settings
New End User Password
Configures user level password. Case sensitive and max. Length of 25
characters.
Confirm End User Password
Re-enter the end user password to confirm change user password on web
GUI to avoid typo or mistakes.
New Viewer Password
Configures viewer level password. Case sensitive and max.
Length of 25 characters.
Confirm Viewer Password
Re-enter the viewer password to confirm change viewer password on web
GUI to avoid typo or mistakes.
Web Session Timeout
Configure timer to logout web session during idle. Default is 10 min.
Range is 2-60 min.
Web Access Attempt Limit
Configure attempt limit before lockout. Default is 5. Range is 1-10.
Lockout time interval
If login attempt failed 5 times, login would be locked out for the time length.
(Default 15 mins. Range 1-15 min).
Web Access Mode
Allows users to choose the Web Access Mode between “HTTPS” and “HTTP”.
If “HTTPS” is selected, web UI will be accessed using HTTPS. Default is
“HTTP”.
HTTP Web Port
Customizes HTTP port used to access the HT813 web UI. Default is 80.
HTTPS Web Port
Customizes HTTPS port used to access the HT812/HT814 web UI. Default
is 443.
Disable SSH
Enables/disables the SSH access. Default is No (enabled).
SSH Port
Allows users to self-configure SSH Port number.
By default, the port number is 22.
SSH Idle Timeout
Configures SSH session timeout. [0 – 86400] seconds; Default is 0.

Grandstream Networks HT801 Specifications

General

Brand	Grandstream Networks
Model	HT801
Category	Telephone Accessories
Language	English