Grandstream Networks HT801 Administration Guide

P a g e | 9
HT801/HT802 Administration Guide
Version 1.0.13.7
• Added feature “RFC2543 Hold”. [RFC2543 Hold]
• Added feature “Visual MWI Type”. [Visual MWI Type]
• Added feature “Ring Frequency”. [Ring Frequency]
• Added feature “Allow SIP Factory Reset”. [Allow SIP Factory Reset] [Reset using SIP NOTIFY]
• Added support for G722 Codec. [HT801/HT802 Technical Specifications]
• Added support for allow user to choose preference codec from PCMU and PCMA for FAX pass-through
codec. [Fax Mode]
Firmware Version 1.0.9.3
• Added feature “Custom Certificate”. [Custom Certificate]
• Added feature “Use P-Access-Network-Info Header”. [Use P-Access-Network-Info Header]
• Added feature “Use P-Emergency-Info Header”. [Use P-Emergency-Info Header]
• Added feature “Conference Party Hang up Tone” when “Special Feature” is set to MTS. [Call Progress
Tones]
• Add support for HTTPS based on TLS v1.2
Firmware Version 1.0.8.7
• Added [MTS] to Special Feature.
• Added support for upgrade device via [FTP/FTPS] server. [UPGRADING AND PROVISIONING]
• Added support to have the call waiting tone through SIP INFO.
• Added feature “Validate Server Certificates”. [Validate Server Certificates]
• Added support for [DDNS]
• Added feature Blacklist for Incoming Calls. [Blacklist for Incoming Calls]
• Added support for [Telnet]
• Added feature [Play busy/reorder tone before Loop Current Disconnect]
Firmware Version 1.0.5.11
• Changed default "Upgrade Via" from HTTP to HTTPS. [Upgrade via] [UPGRADE PROTOCOL]
• Added the ability to schedule [Automatic Reboot]
• Added support for [SNMP]
• Added support for 3 level access through RADIUS authorization (Admin, User and [viewer])
• Added option to customize number of failed [Web Access Attempt Limit] to access web GUI
• Added option to customize idle time to logout the web access with [Web Session Timeout]
• Added option to disable WAN side ports [Black List for WAN Side Port]
• Added feature “Caller ID Fetch Order” option under FXS port settings. [Caller ID Fetch Order]
• Added feature “Enable High Ring Power” option under FXS port settings. [Enable High Ring Power]
• Added feature “Internet Protocol” to choose from “IPv4 Only”, “IPv6 Only”, “Both, prefer IPv4”, “Both,
prefer IPv6”. [Internet Protocol]
• Added feature “IPv6 Address” to configure IPv6 Address. [IPv6 Address]

Grandstream Networks HT801 Specifications

General

Brand	Grandstream Networks
Model	HT801
Category	Telephone Accessories
Language	English