Grandstream Networks HT801 Administration Guide

P a g e | 35
HT801/HT802 Administration Guide
Version 1.0.13.7
Periodic Inform Interval
Sets frequency that the inform packets will be sent out to ACS.
Connection Request
Username
Enters username for ACS to connect to the HT801/HT802.
Connection Request
Password
Enters password for ACS to connect to the HT801/HT802.
CPE SSL Certificate
Configures the Cert File for the phone adapter to connect to the ACS via
SSL.
CPE SSL Private Key
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Enable SNMP
Default is No.
SNMP Version
Choose between (Version 1, Version 2c, or Version 3).
SNMP Port
Listening Port of SNMP daemon (Default 161).
SNMP Trap IP Address
IP address of trap destination. Up to 3 trap destinations are supported. Users
should enter the IP addresses separated with comma (,).
SNMP Trap port
Port of Trap destination (Default 162)
SNMP Trap Version
Choose between (Version 1, Version 2c, or Version 3).
SNMP Trap Interval
Time interval between traps (Default is 5).
SNMPv1/v2c Community
Name of SNMPv1/v2c community.
SNMPv1/v2c Trap Community
Name of SNMPv1/v2c trap community.
SNMPv3 User Name
User name for SNMPv3.
SNMPv3 Security Level
noAuthUser: Users with security level noAuthnoPriv and context name as
noAuth.
authUser: Users with security level authNoPriv and context name as auth.
privUser: Users with security level authPriv and context name as priv.
SNMPv3 Authentication
Protocol
Select the Authentication Protocol: “None” or “MD5” or “SHA.”
SNMPv3 Privacy Protocol
Select the Privacy Protocol: “None” or “AES/AES128” or “DES”.

Grandstream Networks HT801 Specifications

General

Brand	Grandstream Networks
Model	HT801
Category	Telephone Accessories
Language	English