Grandstream Networks HT801 Administration Guide

P a g e | 62
HT801/HT802 Administration Guide
Version 1.0.13.7
*16
Enable SRTP .
*17
Disable SRTP.
*30
Block Caller ID (for all subsequent calls).
*31
Send Caller ID (for all subsequent calls).
*47
Direct IP Calling. Dial “*47” + “IP address”.
No dial tone is played in the middle.
*50
Disable Call Waiting (for all subsequent calls).
*51
Enable Call Waiting (for all subsequent calls).
*67
Block Caller ID (per call). Dial “*67” +” number”.
No dial tone is played in the middle.
*82
Send Caller ID (per call). Dial “*82” +” number”.
No dial tone is played in the middle.
*69
Call Return Service: Dial *69 and the phone will dial the last incoming phone number
received.
*70
Disable Call Waiting (per call). Dial “*70” +” number”.
No dial tone is played in the middle.
*71
Enable Call Waiting (per call). Dial “*71” +” number”.
No dial tone is played in the middle.
*72
Unconditional Call Forward: Dial “*72” and then the forwarding number followed by “#”. Wait
for dial tone and hang up. (Dial tone indicates successful forward)
*73
Cancel Unconditional Call Forward. To cancel “Unconditional Call Forward”, dial “*73”, wait
for dial tone, then hang up.
*74
Enable Paging Call: Dial “*74” and then the destination phone number you want to page.
*78
Enable Do Not Disturb (DND): When enabled all incoming calls are rejected.
*79
Disable Do Not Disturb (DND): When disabled, incoming calls are accepted.
*87
Blind Transfer.
*90
Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial
tone then hang up.
*91
Cancel Busy Call Forward. To cancel “Busy Call Forward”, dial “*91”, wait for dial tone, then
hang up.

Grandstream Networks HT801 Specifications

General

Brand	Grandstream Networks
Model	HT801
Category	Telephone Accessories
Language	English