Grandstream Networks UCM6200 Series Basic Configuration Guide

P a g e | 15
UCM6200 Basic Configuration Guide
CONFERENCE BRIDGE
The UCM6200 supports conference bridge allowing multiple bridges used at the same time:
• UCM6202/6204 supports up to 3 conference bridges allowing up to 25 simultaneous PSTN or IP
participants.
• UCM6208 supports up to 6 conference bridges allowing up to 32 simultaneous PSTN or IP participants.
The conference bridge configurations can be accessed under Web GUI->Call
FeaturesConferenceConference. In this page, users could create, edit, view, invite, manage the
participants and delete conference bridges. The conference bridge status and conference call recordings (if
recording is enabled) will be displayed in this web page as well.
How to Set up a Conference Bridge
1. Click on “Create New Conference Room”.
2. At the “Create New Conference Room” screen, the Extension is automatically populated since the
extension range is in effect. Users can assign another number that is within the Conference Extension
range.
3. Next, uncheck the option “Public Mode”. This will make the password options available. Enter a numeric
password for an admin as well as the regular user password. In this example, the user enters 511511
as the user password and 510510 as the admin password.
Figure 15: Conference Bridge – Create New Conference Room
4. Click “Save” at the bottom then “Apply Changes” at the top.
We should now have a conference room created and the status page will display the following:

Grandstream Networks UCM6200 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6200 Series
Category	PBX
Language	English