Grandstream Networks UCM6200 Series Basic Configuration Guide

P a g e | 22
UCM6200 Basic Configuration Guide
There are 4 different type of VoIP trunks that can be configured. The types are Peered/Registered SIP trunk or
Peered/Registered IAX trunk. This tutorial will demonstrate how to configure a SIP Registered Trunk.
Set up VoIP Trunk
1. Click on “Create New SIP Trunk”.
2. Click the dropdown box for Type and select “Register SIP Trunk”.
3. Enter a name for “Provider Name” e.g., GSTrunk.
4. Configure the IP address or URL of the VoIP providers server as the “Host Name” e.g.,
sip.grandstream.com.
5. Input the username to authenticate with the VoIP provider as the “Username” e.g, 6266389172.
6. Enter password for username to authenticate with VoIP provider server.
7. Enter the AuthID. This is the SIP service subscriber’s ID used for authentication. If not configured, the
CallerID will be used for authentication.
8. Enter an outbound proxy if the provider requires one.
9. Click “Save” and then “Apply Changes” at the top
Figure 22: VoIP Trunks – Create New Register SIP Trunk
After creating the SIP trunk, users can click the on the right of the VoIP trunk for more configuration options.

Grandstream Networks UCM6200 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6200 Series
Category	PBX
Language	English