CE5000-UM-251-9370 2-5
2 PARTS NAMES and FUNCTIONS
2.2 Assembling the Stand
CE5000-60/120:Standard
Stand Construction
The stand is made up of the following parts.
Stand feet (L/R)
Hexagonal socket bolt
(M5) x 12
Coin screw x 4
CE5000-60 only
Hexagonal socket bolt
(M6) x 8
CE5000-120 only
Allen wrench (M5) Allen wrench (M6)
CE5000-120 only
CE5000-60
CE5000-120
Center bar
CE5000-60
CE5000-120
Stand side bar（L/R）
CE5000-60 CE5000-120
Stand Assembly Instructions
(1) Fasten the stand feet (L/R) to the side bars (L/R) with the hexagonal socket bolts (M5), using the Allen
wrench.
Stopper
Hexagonal
socket bolt (M5)
Hexagonal
socket bolt (M5)
Stand side bar Stand side bar
Stand foot Stand foot
Front Front
CE5000-60 CE5000-120
* There are three
bolt holes, but
the center one
is not used.
(2) Fasten the stand tops (L/R) to the stand side bars (L/R) with the hexagonal socket bolts (M5), using the
Allen wrench.
CE5000-60 CE5000-120
Hexagonal
socket bolt (M5)
Stand side bar
Stand top
Hexagonal
socket bolt (M5)
Stand side bar
Stand top
To Next Page
Loading...
