GRAPHTEC CE5000-60 - Setting the Initial Cutting Position (Origin Point)

CE5000-UM-251-9370 6-2
6 DISASSEMBLY AND REASSEMBLY
6.1.3 How to Replace the Center Cover (CE5000-40/60)
How to detach the center cover
(1) Remove the two M3L6 TP head screws from the center cover.
Center cover
M3L6 TP head screw
M4L6 binding
head screw
Right side cover
Left side cover
M4L6 binding
head screw
How to reinstall the center cover
(1) Mount the center cover and fasten the two M3L6 TP head screws.