GRAPHTEC CE5000-60 - Basic Settings and Operations

CE5000-UM-251-9370 3-5
3 OPER ATIONS
3.3 Description of Special Functions A
The cutting plotter is provided with the special functions described below. These functions are specied only
in special situations, and are not normally used�
(1) Turn on the cutting plotter while holding down the key� The menus for setting the special functions are
displayed�
CE5000-40/60/120
":", ";" ENABLED
"W" PEN DOWN
PRIORITY MANUAL
INIT.B 2mm
UP MODE DISABLED
MEDIA ENABLED
HOME ENABLED
B.W.S. DISABLED
In GP-GL command mode
MODEL 7550
PRIORITY MANUAL
INIT.B 2mm
UP MODE DISABLED
MEDIA ENABLED
HOME ENABLED
CIRCLE AUTO
B.W.S. DISABLED
In HP-GL command mode
CE5000-120AP
“:”, “:” ENABLED
“W” PEN UP
PRIORITY COMD
UP MODE DISABLED
MEDIA ENABLED
HOME ENABLED
B.W.S. DISABLED
CROSSCUT FORCE20
PAUSE KEY MENU
MODEL 7586
PRIORITY COMD
UP MODE DISABLED
MEDIA ENABLED
HOME ENABLED
CIRCLE DEFAULT
B.W.S. DISABLED
CROSSCUT FORCE20
PAUSE KEY MENU
In GP-GL command mode In HP-GL command mode
(2) Scroll up or down to select the required menu using the (NEXT) or (PREV�) keys�
(3) Select the setting details using the and keys, and press the (ENTER) key to register the setting� To
cancel, press the (NEXT) or (PREV�) key� The next menu is displayed�
(4) Once all the settings have been made, turn off the cutting plotter�