GRAPHTEC CE5000-60 - Page 44

CE5000-UM-251-9370 6-6
6 DISASSEMBLY AND REASSEMBLY
How to reinstall the front guide (CE5000-120)
(1) Havereadytwo250mm-longmeasuringtapeswhenyoureplacethefrontguide.
Measuring tape
Fold back a 30-mm length of tape at this edge.
Make sure that a thick line is right on the edge.
Front guide 120
Affix approx. 205 mm of the tape here, and
fold back the rest of the tape to the inside of the guide.
(2) Cleanthesurfaceofthefrontguide120withalcoholatthelocationswherethemeasuringtapeswillbe
afxed.
(3) Afxthemeasuringtapesasshownintheabovegure.