GRAPHTEC CE5000-60 - Page 77

CE5000-UM-251-9370 6-39
6 DISASSEMBLY AND REASSEMBLY
ThebottompartofY-railhastotouchtothesidepanelplateandthefrontpartofY-railhastotouchtothe
sidepanelplatewheninstallingtheY-rail.
ThepinchrollerwillnotbecometothecenterofthedriverollerifthefrontpartofY-raildoesnottouchtothe
sidepanelplate.
Andtheheightfromthepinchrollerandthedriverollerwillnotbecomesameheightatrightandleftifthe
bottompartofY-raildoesnottouchtothesidepanelplate.
Thegapshouldnotbeat
theseareaswhentheYbaris
installed.
Thegapshouldnotbeat
theseareaswhentheYbaris
installed.