1 – 3
1.2 Parts Names and Functions
■
Front View
Cutting mat
; Cutting or plotting is performed on this mat.
Grit roller
; Feeds the medium backward or forward
Push rollers
; Pushes the medium against the grit rollers
Pen carriage
; Moves the cutter pen to the left and right
Pen holder
; Holds the cutter pen and moves it up and down
Media set lever
; Raises or lowers the push rollers during loading of a medium
Control panel
; Used to operate the cutting plotter and set functions
USB interface connector
; Used to connect a USB cable
Serial (RS-232C) interface connector
; Used to connect an RS-232C serial interface cable
Media set lever
Pen holder
Pen carriage
Grit roller
Cutting mat
Push rollers
The above illustration is of the CE5000-120 model.
USB interface
connector
Serial (RS-232C)
interface connector
Control panel
To Next Page
Loading...
