2 – 8
■ Loading Sheet Media
Lower the media set lever to raise the push rollers.
With the CE5000-120, load the medium, aligning the edges with the upper and lower scales on the front
guide.
Adjust the position of the left- and right-hand push rollers to suit the medium width.
Raising the media set lever displays a menu for selecting the media mode. Select the media mode.
Step
1
Step
2
Load the medium so that it passes over the media sensor.
Step
3
Step
4
If the “REALIGN ROLLERS” message is displayed when the medium is loaded
and the media set lever is raised, either the right-hand push roller is not positioned
over the right-hand wide grit roller, or the left-hand or center (CE5000-120) push
rollers are not positioned over the grit roller. Check to confirm that they are posi-
tioned correctly.
* The illustration above is of the CE5000-120 model.
Align with scale
Media sensor
* The illustration below is of the CE5000-120 model.
CHECKPOINT
SHEET PRESS ENTR
CHECKPOINT
To Next Page
Loading...
