GRAPHTEC CE5000-60 - Loading the Roll Medium

2 – 5
Position the stock roller with the stoppers towards the front, and place the other stock roller toward the rear
to suit the roll-medium size.
Place the roll medium on the stock rollers, and clamp it between the stoppers. Once the position is fixed,
tighten the screws on the stoppers.
Lower the media set lever to raise the push rollers.
Step
2
Step
3
Loading the Roll Medium
Step
1
* The illustration below is of the CE5000-120 model.
* The illustration below is of the CE5000-120 model.
* The illustration above is of the CE5000-120 model.